PrimaCreator MK10 Hardened Steel Nozzle 0.4 mm,PC-NSP-04Hx1-MK10

Fits to: Wanhao I3, D4, D6, qidi tech, Flash Forge dreamer, creator, Finder, monoprice Maker Select, cocoon create, qidi tech the premium nozzles from PrimaCreator are a Series of replacement nozzles that can make more difference for the result than you may Think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality Brass or steel (depending on Type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don't get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box “ ready to be shipped to you.

• Premium high-quality nozzle for perfect prints “ not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best.
• Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath.
• Hardened steel nozzle perfect for demanding and abrasive filaments like carbon, metal and glow in the dark. With a hardened steel nozzle, you don´t have to worry about your nozzle wearing out.
• Mk10 style nozzle with M7 thread for 1.75Mm filaments fits printers like wanhao I3, I3 plus, D4, D6, qiditech, flash forge dreamer, creator, finder, monoprice maker select, cocoon create, etc.¦.
• What you get: 1 x 0.40Mm - Mk10 hardened steel nozzle.