Liwinting 10pcs 5 Pin L Shape RGBW LED Strip Connector Splitter Right Angle Corner or 90Degree Connector for 10mm Wide SMD 5050 RGBW/RGBWW LED Strip Lights LED Ribbon Lights LED Strip to Strip Adapter

5pin L shape connectors for RGBW/ RGBWW 5050 LED strip lights comes with 2 easy-clasp connectors and a 90 degree L shape PCB board. They are compatible with both non-waterproof and waterproof 10mm wide RGBW/RGBWW 5050 LED strip light.

Installation Instructions:
1.Ensure your LED light strip has 5 contacts (+, G, R, B and W).
2.Open the white clasp of the connector.
3.If you have a waterproof LED strip, you should peel off silicon on the surface around soldering/cutting line area, then insert the LED strip into the clasp, with the 5 copper contacts on the LED strip under the 5 prongs in the connector. Make sure to match the + side on the LED strip to the + side on the connector; If you have a non-waterproof LED strip, just insert the LED strip into the clasp, with the 5 copper contacts on the LED strip under the 5 prongs in the connector. Make sure to match the + side on the LED strip to the + side on the connector
4.Close the clasp.
5.Gently pull the LED strip to confirm you've made a solid connection.
6.Your connection is successfully made!
Package Includes
10x 5pin L-shape connectors for 10mm wide RGBW/ RGBWW 5050 LED strip lights
Tips:
If the connection becomes loose, the LEDs will flicker or do not light up. To solve the problem, please follow these steps:
01. Power on your LED strip.
02. Open all the caps of the L-shape connector.
03. Insert your LED strip into the connector, slightly pull and push your LED strip to adjust the contact points between the 5 copper contacts on your LED strip and the 5 prongs in the connector. If the LEDs still do not light up, please use your finger to press a little hard on the 5 prongs in the connector.
04. If the LEDs still do not light up, please adjust the contact points between the 5 copper contacts on the L-shape PCB board and the 5 prongs in the connector, until you see the LEDs light up.

• 5pin L shape Connector Only suitable for 10mm wide SMD 5050 RGBW/ RGBWW LED strip lights. Not suitable for 12mm wide SMD 5050 RGBW/ RGBWW LED strip lights!.
• Compatible with both Waterproof and Non-Waterproof 10mm wide SMD 5050 RGBW/ RGBWW LED strip lights..
• 5 channel PCB chip with 2 easy-clasp connectors, Seamless extension for your RGBW LED strips around sharp corners.
• Simple but effective, tool free, easy installation by clipping system, making neat and good looking LED strips turn corners, couldn't be any easier using these connectors.
• With these L-shaped connectors, you can avoid twisting your LED strips which potentially damages your LED strips..