Aquapac "Connected Electronics" Waterproof Wire-Through Case (558)

Product Description ------------------- Product Overview This is one of a range of cases which waterproof around a wire or tube. Just £45. The two other case sizes you might want to look at: the Radio Mic Case 158, and the Small Wire-Through Case 548. Product Features and Benefits. It’s made of a thin but remarkably tough material called TPU. Thin enough that you can operate all the controls normally through it. And it’s very light - only 145g including the belt. The TC clamp will seal around a wire or tube of up to 2.5mm/0.1in diameter. We use a patented silicone-foam ket in combination with unique 2-stage closures to ensure a fool-proof seal. Everything stays in one piece even when open. Also protects from dust, dirt and sand. Supplied with a belt, or feed your own belt through the case. It comes with a lanyard too. Like most of our cases it'll float if you drop it in the drink. The seams are high-frequency welded to form a super-strong bond. Waterproofness Warning!: This case features our 'TC' Aquaclip which makes the case waterproof to IPX7. Temporary immersion is fine, but not continuous immersion. Extended Warranty/Guarantee Wondering about a cheaper case from another company? Well what warranty do they offer? We combine an unrivalled Full 5-Year Warranty* with exceptional after-sales service. We very much doubt you’ll get anything like it from any other brand. (*According to the Magnuson-Moss Warranty Act 1975 a warranty must be described as either “Full” or “Limited”. These terms are very strictly defined. If a warranty isn’t described as one or the other, then beware. Similarly you should beware of so-called “Lifetime” warranties where Lifetime may actually mean no longer than the manufacturer’s estimate of the expected life of the product.) Extra Stuff Aquapac commissioned research by Imperial College London into the use of its cases after receiving a large number of customer enquiries regarding their suitability for use with insulin pumps. Results show that, in some circumstances, insulin flow rate can be reduced by the case. In particular, low flow rates are impeded, and as such Aquapac can make no cl regarding the suitability of these cases with insulin pumps. Use of these cases with insulin pumps is entirely at the discretion of the user. Aquapac has been advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels. The tests were conducted by Imperial College of Science, Technology and Medicine using a Roche Accu-Check Spirit insulin pump at a temperature of 20C at flow rates of 2U/hr and 10U/hr. The as of insulin delivered over 60 minutes observed were as follows: 2U/hr not in a case - 0.0131g (flow rate of 100%) 2U/hr in Aquapac 150 - 0.0106g (flow rate of 81%) 2U/hr in Aquapac 150 - 0.0056g (2nd test model)(flow rate of 42%) 2U/hr in Aquapac 550 - 0.0121g (flow rate 92%) 10U/hr not in case - 0.0864g (flow rate of 100%) 10U/hr in Aquapac 150 - 0.0878g (flow rate of 100%) 10U/hr in Aquapac 550 - 0.0903g (flow rate of 100%). 21st August 2006. You’ll find more info about our range at www.aquapac.info. About Aquapac Aquapac is the world’s favourite brand of 100% waterproof cases. We launched our first case way back in 1983. And since then we’ve been honoured with the Queen’s Award for Enterprise… three times! We’re based in London, but our products are to be found on all every continent. Over 90% of our range is Made in the UK. People are trusting their valuables to our waterproofing, so top-quality manufacturing quality is absolutely crucial. Legal Discler ---------------- Waterproofness Warning: This case features the 'TC' Aquaclip which makes the case waterproof to IPX7. Temporary immersion is fine, but not continuous immersion. P.when('A').execute(function(A) { A.on('a:expander:toggle_description:toggle:collapse', function(data) { window.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); Box Contains ------------ Grey TPU case grey belt black lanyard See more ( javascript:void(0) )

• Make sure this fits by entering your model number..
• A completely waterproof case with a quick-release waist strap that allows use of wire-out equipment through the case whilst protecting it against the elements, so you can stay in touch.
• Ideal for use by professionals with spet electronic devices but also suitable for a permanently connected small , large phone or audio player.
• Designed for electronics that require a thin wire to be connected to them at all times; the special wire-through clamp at one end allows a wire of up to 2.5mm diameter to stay connected.
• IPX6 Stormproof protection against powerful water jets keeps your radio safe and dry so it can be safely used in extreme wet conditions wherever your adventures take you.
• Completely PVC-free and with high-frequency welded seams, this case is constructed from remarkably tough, ultra-clear TPU. Suitable for devices up to 250 x 225mm (circumference x height).