Installation Instructions:
1. Ensure your LED strip is 10mm wide 5 pin RGBW 5050 LED strip and has 5 copper contacts (+, G, B, R, W).
2. Carefully cut your LED strip along the cutting line/ soldering line.
3. Open the cap of the connector.
4. If you use a non-waterproof LED strip, please insert the LED strip into the connector. Make sure the 5 copper contacts on the LED strip are under the 5 electrical conductors in the connector;
If you use a waterproof LED strip, please first remove the silicon around the soldering line/cutting line, then insert the LED strip into the connector. Make sure the 5 copper contacts on the LED strip are under the 5 electrical conductors in the connector.
5. Close the cap.
Important note:
If the LED strips flicker or do not light up, it is because there is poor contact between the connector and the LED strip. To solve the problem, please follow these steps:
1. Power on your LED strip.
2. Open all the caps of the connector.
3. Insert your LED strip into the connector, slightly pull and push your LED strip to adjust the contact points between the 5 copper contacts on your LED strip and the 5 electrical conductors in the connector. If the LED strips still do not light up, please use a thin and hard object to simultaneously press hard on both ends of each electrical conductor in the connector, to lower the positions of the contact points on the 5 electrical conductors. In this way, the 5 electrical conductors in the connector can totally touch the 5 copper contacts on the LED strip, and this will ensure good electrical conductivity.
Package includes:
10pcs 5-pin connector cable, 17cm long
Installation Instructions:
1. Ensure your LED strip is 10mm wide 5 pin RGBW 5050 LED strip and has 5 copper contacts (+, G, B, R, W).
2. Carefully cut your LED strip along the cutting line/ soldering line.
3. Open the cap of the connector.
4. If you use a non-waterproof LED strip, please insert the LED strip into the connector. Make sure the 5 copper contacts on the LED strip are under the 5 electrical conductors in the connector;
If you use a waterproof LED strip, please first remove the silicon around the soldering line/cutting line, then insert the LED strip into the connector. Make sure the 5 copper contacts on the LED strip are under the 5 electrical conductors in the connector.
5. Close the cap.
Important note:
If the LED strips flicker or do not light up, it is because there is poor contact between the connector and the LED strip. To solve the problem, please follow these steps:
1. Power on your LED strip.
2. Open all the caps of the connector.
3. Insert your LED strip into the connector, slightly pull and push your LED strip to adjust the contact points between the 5 copper contacts on your LED strip and the 5 electrical conductors in the connector. If the LED strips still do not light up, please use a thin and hard object to simultaneously press hard on both ends of each electrical conductor in the connector, to lower the positions of the contact points on the 5 electrical conductors. In this way, the 5 electrical conductors in the connector can totally touch the 5 copper contacts on the LED strip, and this will ensure good electrical conductivity.
Package includes:
10pcs 5-pin connector cable, 17cm long
desertcart is the best online shopping platform where you can buy LitaElek 10pcs RGBW LED Strip Connector 10mm Wide RGBW 5050 LED Tape Connector Jumper 5 Pin LED Ribbon Connector Adapter Extender RGBW LED Band Extension Cable, 17cm/6.7in Long from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
desertcart ships the LitaElek 10pcs RGBW LED Strip Connector 10mm Wide RGBW 5050 LED Tape Connector Jumper 5 Pin LED Ribbon Connector Adapter Extender RGBW LED Band Extension Cable, 17cm/6.7in Long to London, Birmingham, Manchester, Leeds, Newcastleand more cities in GB. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the LitaElek 10pcs RGBW LED Strip Connector 10mm Wide RGBW 5050 LED Tape Connector Jumper 5 Pin LED Ribbon Connector Adapter Extender RGBW LED Band Extension Cable, 17cm/6.7in Long speedily without the hassle of shipping, customs or duties.
desertcart buys LitaElek 10pcs RGBW LED Strip Connector 10mm Wide RGBW 5050 LED Tape Connector Jumper 5 Pin LED Ribbon Connector Adapter Extender RGBW LED Band Extension Cable, 17cm/6.7in Long directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.
Yes, it is absolutely safe to buy LitaElek 10pcs RGBW LED Strip Connector 10mm Wide RGBW 5050 LED Tape Connector Jumper 5 Pin LED Ribbon Connector Adapter Extender RGBW LED Band Extension Cable, 17cm/6.7in Long from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.