Car Phone , Mpow Magnetic Windscreen Cars Holder Dashboard Phone Holder

Magnetic Car Phone Holder's three installation Option for Metal Plate
Option 1: With no phone case: Attach it directly to the back of the phone.
Option 2: With a THICK case (＞2mm): Attach it to the back of the phone case.
Option 3: With a THIN case (≤2mm): Place it between the phone and the case - either with or without using the adhesive.

The Proper Position to Attach the Metal Plate
To avoid interfering with wireless charging functionality, please attach the metal plate to the right place.
(1) For Qi Wireless Charging Phones: Attach the metal plate to the bottom of the phone/case to prevent blocking the Qi charging coil.
(2) For Non-wireless Charging Phones: Attach the metal plate to the center of the phone/case.

Caution: For Suction Cup Base
1. Do not install the suction cup base on rough, dirty or curved surfaces.
2. After installation, push the lever down to lock the suction cup.
3. For maximum stability, the preferable installation area of the stabilizer base should be close to the phone holder.
4. After installing the anti-shake stabilizer, press and hold it for 10s.

Mpow Magnetic Car Phone 's Tips
1. If your phone case is too thick (＞2mm), stick the metal plate on the back of the case.
2. If your phone has Qi wireless charging or NFC function, attach the metal plate to the phone case, and remove the case when using these functions.
3. If your phone is large or heavy, please use the rectangular metal plate.
4. The ed device is not recommended to exceed 300g/10.6oz or 2mm, if exceeded, please attach the metal plate to the back of the phone/ case.
5. The provided clear protective film should be used before attaching the metal plate directly to your device to prevent scratches or residues.
6.This magnetic Car phone Holder is not suitable for soft dashboard

• About this item.
• Kindly Note:We will solve the problem for you in the first time.Note: once the product is fixed, try not to move, keep good sealing, prevent air from entering the suction cup. If you have to move, please press the suction cup base first, Exhaust the air, and then adjust the gear. Tip: sprinkle a little water in the place where the sucker is fixed, and the fixity is better.Note：remove the dust film from the bottom of the bracket before installing the car phone holder .
• Universal Magnetic Car Phone Cradles:The Car Phone Holder works with Galaxy S10/9/8/7/6 J5/J3/A5/A6/A7,P20/Mate10/Mate20/ honor 8X,iPhone11 Pro/11/X/XS/XR/8/7/6,Sony Xperia Xz3;Xiaomi Redmi Note6 Pro/ Redmi Note5 Pro/Redmi Note 5/mi8 Pro/mi8/Mi8 Lite )including but not limited to the iPhone Series,Galaxy Series, Motorola,and GPS device.4 powerful neodymium magnets keep your phone in place and have no chance of falling.Just hover your device near the magnetic surface and it locks instantly..
• Upgraded Strong and Secure Suction Cup: Mpow Magnetic Car Phone Holder the vacuum suction cup with sticky gel and locking lever s securely onto most flat surfaces Magnet Car Phone equipped with an anti-shake stabilizer it minimizes the wobble of the phone when driving on rough roads The gel is re-useable simply wash air dry and re-attach (Note This magnetic Car phone is not suitable for soft dashboard).
• Outstanding Installation Flexibility: The innovative magnetic car phone holder is made for ultimate ing flexibility on the dashboard or windshield. With a 15cm/5.9in long and flexible gooseneck, Mpow magnetic car phone can be bent to fit your dashboard without blocking the center console’s raised display as well as your ..
• Installation Flexibility & Infinite Viewing Angle: The innovative magnetic car phone is made for ultimate ing flexibility on the dashboard or windshield.With a 15cm/5.9in long and flexible gooseneck, Mpow magnetic car phone holder's gooseneck can be bent into any shape to suit your need for viewing angle.Thanks to the 360° ball joint,you can tilt your phone up or down,left or right,or position your phone in portrait or landscape mode,keeping your phone visible and handy all the way..