Color:blue
Note: Pro, this product is suitable For for all Mercedes-Benz of cars
Voltage:12 (V)
Size: 8.7*8.7cm
Wiring length: 0.6 meters
Material: ABS plating, 3M glue at the bottom
Package Contents:1*Car Auto Tail Logo Light(Other accessories are not included)
Note:
Avoid giving children a play. Do not accidentally install or disassemble this product during driving.
[Tools prepared before installation] Please have the following tools ready before you start:
1. Flat head screwdriver 2. Phillips screwdriver 3. Insulating tape 4. Towel 5. Pliers
【Installation Notes】
1. First place a towel next to the tailgate logo, use a flat-blade screwdriver to shake the logo, and towel to prevent scratching the body.
2. Pay attention to peeling off the double-sided rubber first. When the squatting is moderate, don't be too fierce.
After a little bit, slowly squat down, clean the car logo and the double-sided tape on the body.
3. Use a Phillips screwdriver to remove the partition inside the tail box. Note that there are clips in some places. Be careful to remove the baffles to see the various lines.
4. Now install the car standard light, the car standard light power line passes through one of the car standard positioning holes,
and wears the single-sided glue on the back of the car standard light inside the car box.
While pulling the wire, the car mark light is glued to the vehicle body, and the pressure is pressed. tight.
5. The car light is installed, and now it is connected to the power supply.
The car light should be connected to the power supply of the license plate, so that when the night light is turned on,
the car light will be turned on at the same time, and the power connector of the rear license plate light is found.
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Note: Pro, this product is suitable For for all Mercedes-Benz of cars
Voltage:12 (V)
Size: 8.7*8.7cm
Wiring length: 0.6 meters
Material: ABS plating, 3M glue at the bottom
Package Contents:1*Car Auto Tail Logo Light(Other accessories are not included)
Note:
Avoid giving children a play. Do not accidentally install or disassemble this product during driving.
[Tools prepared before installation] Please have the following tools ready before you start:
1. Flat head screwdriver 2. Phillips screwdriver 3. Insulating tape 4. Towel 5. Pliers
【Installation Notes】
1. First place a towel next to the tailgate logo, use a flat-blade screwdriver to shake the logo, and towel to prevent scratching the body.
2. Pay attention to peeling off the double-sided rubber first. When the squatting is moderate, don't be too fierce.
After a little bit, slowly squat down, clean the car logo and the double-sided tape on the body.
3. Use a Phillips screwdriver to remove the partition inside the tail box. Note that there are clips in some places. Be careful to remove the baffles to see the various lines.
4. Now install the car standard light, the car standard light power line passes through one of the car standard positioning holes,
and wears the single-sided glue on the back of the car standard light inside the car box.
While pulling the wire, the car mark light is glued to the vehicle body, and the pressure is pressed. tight.
5. The car light is installed, and now it is connected to the power supply.
The car light should be connected to the power supply of the license plate, so that when the night light is turned on,
the car light will be turned on at the same time, and the power connector of the rear license plate light is found.
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
desertcart is the best online shopping platform where you can buy 5D LED Car Tail Logo Light Badge Lamp Emblem For for Mercedes GLK-Class,S-Class Maybach,A/C/CLA/GLA/G/M/S/SL-Class AMG,etc All Models for Mercedes-Benz all of cars (blue) from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
desertcart ships the 5D LED Car Tail Logo Light Badge Lamp Emblem For for Mercedes GLK-Class,S-Class Maybach,A/C/CLA/GLA/G/M/S/SL-Class AMG,etc All Models for Mercedes-Benz all of cars (blue) to London, Birmingham, Manchester, Leeds, Newcastleand more cities in GB. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the 5D LED Car Tail Logo Light Badge Lamp Emblem For for Mercedes GLK-Class,S-Class Maybach,A/C/CLA/GLA/G/M/S/SL-Class AMG,etc All Models for Mercedes-Benz all of cars (blue) speedily without the hassle of shipping, customs or duties.
desertcart buys 5D LED Car Tail Logo Light Badge Lamp Emblem For for Mercedes GLK-Class,S-Class Maybach,A/C/CLA/GLA/G/M/S/SL-Class AMG,etc All Models for Mercedes-Benz all of cars (blue) directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.
Yes, it is absolutely safe to buy 5D LED Car Tail Logo Light Badge Lamp Emblem For for Mercedes GLK-Class,S-Class Maybach,A/C/CLA/GLA/G/M/S/SL-Class AMG,etc All Models for Mercedes-Benz all of cars (blue) from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.