NeuLog logger sensor measures voltages, and can be used with Van
de Graaff generators, fuel cells, batteries, and parallel and
series circuits for further study. The logger sensor has power
and ground wires with 4.0mm plugs to connect to electric
circuits, and is attachable to the NUL 202 current logger sensor
to study current dependence on voltage in various electric
circuits (sensor sold separately). The logger sensor has an
experiment duration of 50.0 milliseconds to 31.0 days, and
15.0-bit analog-to-digital converter (ADC) resolution for reading
a range of values. The logger sensor measures low-voltage AC and
DC circuits and, with a step-down transformer, can measure the AC
voltage of the main supply and check its frequency up to
50.0/60.0Hz. (Transformer sold separately; the sensor’s input is
limited to 60.0Hz and +/-20.0V maximum.) The voltage logger
sensor can be used for physics, electronics, chemistry, and
biology experiments, and is suitable for grade 3 and higher, or
ages 10 to 21.
The logger sensor consists of a data logger, flash memory, and a
sensor for fully self-contained data gathering, and is
plug-and-play for immediate readings as soon as it is connected.
The logger sensor sends data in digital format to a PC, Mac,
, smart phone, or other viewer device, and provides
multiple connection options, including USB and wireless. The
logger sensor’s browser-based software adjusts ranges and gains,
and provides applications for presenting data, including online
and offline modes, tables, graphs, data analysis, double-axis set
up, statistic operations, and mathematical operations. The logger
sensor is encased in durable plastic, and has an LED indicator to
track experiment status, with push buttons for calibration and
start/stop experiments in offline mode for ease of operation. To
take an assortment of readings during a single experiment, the
logger sensor can be attached to another sensor; one to 10 logger
sensors can be used per experiment (sensors sold individually).
For efficiency, the logger sensor can store up to five
experiments in flash memory, and saved experiments can be
uploaded to a PC or Mac at any time. Additional accessories, such
as USB, Wi-Fi, or battery modules, are required for operation
depending on the device (PC, , viewer, and so on) used to
receive readings from the sensor. (Accessories and devices sold
separately.) The logger sensor includes a guide with instructions
for use and care, and measures 6.5 x 7.0 x 1.5cm (L x W x H). (L
is length, the horizontal distance from left to right; W is
width, the horizontal distance from front to back; H is height,
the vertical distance from the lowest to highest point.)
Logger sensors are electronic devices used to record a variety of
energy and environmental measurements, such as temperature,
humidity, voltage, and soil moisture, at set intervals over a
period of time in scientific classroom and field settings.
Specifications
Range and operation modes +/- 20.0V
ADC resolution 15.0 bit
Accuracy 1.0%
Resolution 0.01V
Maximum sample rate (S/sec) 100.0 long duration
3,000.0 short duration
Science education products incorporate applied math and science
principles into classroom and homeschool-based projects. Teachers
in pre-K, elementary, and secondary classrooms use science
education kits and products alongside science, technology,
engineering, and math (STEM) curriculum to demonstrate STEM
concepts and real-world applications through hands-on activities.
Science education projects include a broad range of activities,
such as practical experiments in engineering, aeronautics,
robotics, energy, chemistry, physics, biology, and geology.
NeuLog brand products, manufactured by EISCO Scientific and
Science Educational Systems (SES), include logger sensors,
software, and accessories for energy and environmental data
acquisition and measurement. EISCO Scientific was founded in
1968, and is headquartered in Rochester, NY; SES was founded in
1983, and is headquartered in Israel. Both companies meet
International Organization of Standardization (ISO) standard
9001.
What’s in the Box?
Voltage logger sensor
Power and ground wires
4.0mm plugs
Guide
- Logger sensor for measuring voltage.
- Can be used with Van de Graaff generators, fuel cells, batteries, and parallel and series circuits for further study.
- Attachable to NUL 202 current logger sensor to study current dependence on voltage in various electric circuits (sold separately).
- "Required accessories-To use sensors you will need either: a USB Module (USB 200) to connect via USB cable to PC or Mac, or a Wi-Fi Module (WIFI201) and battery (BAT200) to connect to any Wi-Fi enabled device (Smart Phone, , Computer)".
- Experiment duration of 50.0 milliseconds to 31.0 days for versatile use, and 15.0-bit analog-to-digital converter (ADC) resolution for reading range of values.