KKmoon CNC 1419 Metal Engraving Cutting Machine Router Desktop DIY Milling Machine Aluminum Copper Wood PVC PCB Machine

Specifications:
Material: Aluminum alloy+Aluminum Profiles
Working range: 190*140*40mm / 7.5*5.5*1.6in
Frame Size: 360*300*330mm/ 14*11.8*13in
Spindle: 775 spindel (12-36 V) (24 V 7000r; 36 V 9000r)
Stepper Motor: 4-wire 2-phase stepper motor (1.3A 0.25N.m)
Supported Formats: jpg / bmp / png
Communication Port: Micro USB
Screw: T8
Power Supply: 24 V 5-6A (110 V-240 V)
Support System: Windows XP/ Win 7/ Win 8/ Linux
Package Size: 44*25*18cm/ 17.3*9.8*7.1in
Package Weight: 9300g/ 328oz
Notice for use:
1. After adjusting the machine, open the engraving file to check where the zero point is, usually at the lower left corner, the same as the 2 test codes.
2. Locate the machine to the lower left corner of the workpiece first, then lower the cutter and the spindle must be turned on. Slow it down when the cutter is close to the workpiece, gently adjust it to the surface. 
3. Important! After lowering the cutter, click "XY zero " and "Z zero". Then you can click "start" to engrave. 
4. If DOOR alarm appears, please make sure to turn on the power switch on the motoard . then please reconnect the motoard.
Tips: It is better to run the machine without any workpiece first. Test it before you start formal engraving. 
Notes:
1. This machine is NOT assembled. You will receive all the parts in the package and you need to assemble it yourself.
2. Please note MDF is not equal to normal wood, as it doesn’t have a worldwide standard, so you need to test how deep can cut.
3. Please wear goggles during using and avoid touching the  directly with your eyes and skin.
4.The shipping package contains CD, you can  get  engraving tutorial, CNC tutorial ,user guide, software download link, etc. from CD.

• This is an upgraded new engraving machine, compared to the old model, with an offline offline controller, can be sculpture in the offline state ..
• Made of aluminum and with red oxidation , the all-metal fuselage is durable and good looking..
• All axles of the machine are fixed by high precision flange bearings with straight-line electroplating, T8 screw rod with double nuts and the 304 stainless steel screws is non-oxidizing..
• Three-axis stepper motors are all controlled by high precision stepper motors, equipped with double nuts and springs, so as to maximize the preferential accuracy..
• Unique cooling system, module temperature will not exceed 25 degrees, engraving can work for a long time..
• ›See more product details.