APEMAN Dash Cam Mini Hardwire Kit CH45, Mini USB Hard Wire Kit for Dashcam, DC 11.5V-40V to 5V Car Charger Power Kit, Build-in G-Sensor and Low Voltage Battery Drain Protection for Dash Cameras

APEMAN Mini Hardwire Kit for Mini USB Dash Cam APEMAN C450 Series A

It's a must-have if you need 24/7 parking guard with your dash cam. It connects the camera directly to the OBD-II connector of your car under the dash cam for continuous power from the vehicle’s battery. When the car is driving, it can be used replacing the ordinary car charger, and the car ignition will not be powered off.

APEMAN Hardwire Kit is specialized for APEMAN’s Star Dash Cam - C450 Series A or other Mini charging port car recorder.

Specifications:
★ Connector: Mini USB
★ Input Voltage Range: 11.5V-40V
★ Output: 5V /1.5A
★ Working Temperature:-10-60℃
★ Cable Length: 3M
★ Low Voltage Protection: When voltage lower than 11.5, automatically cut off the power

Installation Instruction:
1. your camera where it has full vision of your road
2.Run the wiring towards to the OBD-II connector of your car
3.Hide the wire under the headboard
4.Remove the 3M Sticker of the G-sensor on hardwire kit, then firm to the windshield where close to dash cam.
5.Connect the hardwire kit with the dash cam and power the camera for using.

Warm Tips:
★ If you don't have experience on installing the hardwire kits for the dash cam, please ask to APEMAN Customer Team for professional help, we are always here to serve you.

• About this item.
• CH45 for Mini USB Charging Port - Fits for APEMAN C450A, the kit is basically fit for Mini port Dash Cams or Car Charger..
• Compatible 11.5–40V Vehicles - This Hardwire Kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, with wide range of input voltage(Voltage between 11.5-40V), suitable for most of car mini USB device on the market..
• Build-in G-SENSOR - The dash cam automatically shuts down 5 minutes after the car is turned off. At this time, the G-SENSOR in the OBD starts to work (in the monitoring state). Once the car is vibrated, the OBD will be powered on to turn on the recorder. When there is no vibration signal, the driving recorder will automatically shut down after 1 minute, which will save the battery..
• 24 Hours Parking Surveillance - The hard-wire kit connected to OBD-II connector of your car, can uninterruptedly supply power for dash camera for 24 hours. It can even supply Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot..
• Low Voltage Protection - With a smart low voltage protection system, the camera will power off automatically when the battery voltage lower than to 11.5V, thus preventing it draining the battery..