220V Circular Water Injection Circular Saw Blade Sharpener Grinder Grinding Machine Solid Motor 250W

Product description

Feature:
Steel chassis construction.
Grinding wheel angle control with large aluminum knob.
Will hold each blade head position by a position lock.
X axis feed wheel, stable and very sharp grinding.
Rotary angle mark.

Specifications:
Power: 250W
Voltage: 220V
Running Speed: 2850rpm
Adjusting Angle Of The Wheel: ±20°
Handle Turning Angle: 30 Degrees From Left And 45 Degrees From Right
Working Diameter: 80-700mm
Grinding Wheel Size: 4.92" (125mm)
Bore Size Of Grinding Wheel: 1.26" (32mm) 
Working Diameter: 80-700mm
Adjusting Angle Of The Wheel: ±20°
Handle Turning Angle:30 degrees from left and 45 degrees from right
Running Speed: 850rpm
Package Size:16.93"x16.93"x13.58"(43x43x34.5cm)
Weight:66.14lbs (30kgs)

Method of operation:
1, loosing the fascia, then adjust the angle of grinding blade and fasten.
2, adjusting of center axle.
Rotating the center axle to the grinding blade.
Pushing the center axle to the right.
Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth.
Rotating the rotation table to ensure the angle of grinding blade.
The cross angle between the grinding surface and work surface is about 5.
3, adjusting of positioning assembly.
Adjusting the saw blade to the best grinding position, rotating the positioning frame and fascia.
Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw.
Fourth, adjusting the center axle to the same gap of grinding quantity to the right.
Last, when all the parts are fastened, the saw blade supported with hand will be grinded.

Legal Discler

Safety remarks:
Should match the standard voltage; We must strictly take a good ground, install leakage circuit breakers.
The machine should be set in a dry, clean, steady and parallel place.
Release the round plat and then adjust the saw blade angle.
Check all parts that need locks before operation.
Take off the electricity after work finishing.
After the machine runs well then you can start the work.

  Package Included:
1 set of 220V Saw Blade Grinder Machine

• About this item.
• ▲ The machine structure is strong and it can work on max diameter φ700mm..
• ▲ This machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm..
• ▲ The direction of the sharpening should be paralleled with the diamond sanding wheel, it is better for grinding the back teeth face..
• ▲ The specially equipped motor has a very good running speed which can have a very good co-operation with the diamond sanding wheel..
• ▲ Also suitable to grind other material such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc..
• ›See more product details.