TANGON V8 Engine Radiator, with Motor Sink Radiator Cooling Fan Heat Dissipation RC Simulation Accessories for 1/10th Scale Traxxas TRX4 D90 D110 D130 SCX10 (red)

Feature:

common use, can be applied on trx4, scx10, scx10II motor, the OD of motor can be 36mm-38mm.
Temperature sensor with fan set inside, the fan will be activated when 35℃ above, and will stop when 25℃ below. High speed fan, with 25CFM ±10% wind flow
Cylinder cap，ignition coil secondary cable，engine cover，exhaust manifold，air intake，common rail are heat-resistant ABS material(100℃ limited)，can be painted as you like, cylinder block &oil level gauge are stainless steel material, heat sink is alu. material.

Design based on LS3 V8 6.2Lengine , simulated cylinder cap, ignition coil secondary cable, engine cover, exhaust manifold, air intake, common rail, cylinder block, oil level gauge details.
Preferred by Model Hobbists & R/C Enthusiasts

Description:

Length x width x hight:63mm x 71mm*52mm
Weight:60G
Suitable for : 1/10 Traxxas TRX4 / Jeep / Land Rover / D90 / D110 / D130 / SCX10 / SCX10II RC Car


Attention when this product be equipped on trx4 original motor position：

One side of exhaust manifold should be removed, that will let V8 engine to enough space to be installed.
You must cut part of the body posts and s to have enough space to the V8 engine.
DJC-0640 trx4 dashboard & DJC-0617interior can not be used when fix V8 engine on original position, to have perfect effect, MUST apply the front-engine set(NOT INCLUDED), then DJC-0640&DJC-0617&V8 engine can work together perfectly.


Package Included:

1 set Simulation Engine Cover + Radiator Motor Fan (As the picture show)

• common use, can be applied on trx4, scx10, scx10II motor, the OD of motor can be 36mm-38mm..
• Engine Radiator: V8 engine appearance with air intake design. Temperature control with 13000 rpm high speed dual fan to dissipate heat for the motor. The built-in fan effectively prevents destruction by objects on the road such as rocks. The radiator is clamped directly on the motor,Make the vehicle interior more simulation..
• Temperature sensor with fan set inside, the fan will be activated when 35℃ above, and will stop when 25℃ below. High speed fan, with 25CFM ±10% wind flow.
• Design based on LS3 V8 6.2Lengine , simulated cylinder cap, ignition coil secondary cable, engine cover, exhaust manifold, air intake, common rail, cylinder block, oil level gauge details..
• The surface is glossy and of high polishing performance, with exquisite workmanship..